DoorMaster Tips
DoorMaster Tips : How To Fit an Internal Door Frame.
13
Oct
Oct
Today at DoorMaster Tips we’re going to show you how to fit an internal door frame
- Firstly, measure the opening you have and confirm that the frame kit and door intend to use will fit.
- Cut the frame lintel to the required width
- Cut each leg to the required height.
- Next, lay each frame leg and the lintel on the floor or on a bench.
- Pre drill the lintel twice at each end from the top and countersink these holes to allow it to accept the screws that will secure it to the top of the legs.
- Stand the frame in the new opening and using a spirit level make sure the lintel is level, now check each leg is level on both surfaces (edge and face).
- Continue to check the frame is square and level as you proceed with fixing these screws to the top of your wall.
- Next, check it is all secure, square and level. Now, it’s time for the door stops.
- Cut the lintel door stop to size, pin it into position to suit the door thickness, now do the same with the door stop legs.Lastly, fill in any holes for the pins or screws.
For more DoorMaster Tips visit our Next Blog
Id like to thank you for the efforts youve put in writing this blog. I am hoping to check out the same high-grade content by you later on as well. In truth, your creative writing abilities has motivated me to get my own, personal website now 😉
Thanks for your feedback
Good post. I learn something totally new and challenging on websites I stumbleupon on a daily basis. It will always be useful to read content from other authors and use something from their websites.
Thanks for your blog, nice to read. Do not stop.